STM32MP157F-DK2: Difference between revisions
(New page) |
(Add datasheets and stuff for LCD) |
||
(14 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
The STM32MP157F-DK2 is a development board starring the | [[Category:Hardware]] | ||
The STM32MP157F-DK2 is a development board starring the STM32MP157F system on a chip and a ton of peripherals. | |||
This board is a newer revision of the STM32MP157C-DK2 and as far as I can tell all STM32MP157C-DK2 hardware documentation applies to the STM32MP157F-DK2. | This board is a newer revision of the STM32MP157C-DK2 and as far as I can tell all STM32MP157C-DK2 hardware documentation applies to the STM32MP157F-DK2. | ||
Almost all you need to know about this board and its chips is available without signing any kind of NDA or jumping through hoops. Very very convenient. | |||
== Specifications == | == Specifications == | ||
Core details: | |||
*32-bit Dual Core Cortex-A7 800MHz main processor | |||
*32-bit Cortex-M4 coprocessor | |||
*512MiB DDR3 RAM | |||
*5V 3A power supplied over Type-C | |||
*ST-LINK/V2-1 debugging | |||
* $109 USD from Mouser (as of 2022-01-29) | |||
Storage: | |||
* microSD card slot | |||
Networking: | |||
*Wi-Fi 802.11b/g/n | |||
*Bluetooth Low Energy | |||
*10/100/1000 Gigabit Ethernet | |||
USB: | |||
*4 USB 2.0 host type-A ports | |||
*Dual-role USB 2.0 host or device type-C port | |||
Video: | |||
*4 inch 480x800 LCD touch screen | |||
*HDMI | |||
Audio: | |||
*Stereo headset jack with microphone input | |||
Other IO: | |||
* Raspberry Pi 40-pin compatible header | |||
* Arduino Uno V3 compatible headers (3.3v only) | |||
*4 user LEDs | |||
*2 user buttons | |||
== Documentation == | == Documentation == | ||
System on chip documentation: | |||
== | * [https://www.st.com/en/microcontrollers-microprocessors/stm32mp157f.html STM32MP157F web page] is the first resource for documentation on the chip | ||
* [https://www.st.com/resource/en/datasheet/stm32mp157f.pdf STM32MP157F datasheet] gives an exhaustive overview on the chip | |||
* [https://www.st.com/resource/en/reference_manual/rm0436-stm32mp157-advanced-armbased-32bit-mpus-stmicroelectronics.pdf STM32MP157 reference manual] provides information for driver writing | |||
* [https://wiki.st.com/stm32mpu/wiki/Main_Page stm32mpu wiki] has a large amount of documentation for all levels of development | |||
Board documentation: | |||
* [https://www.st.com/en/evaluation-tools/stm32mp157f-dk2.html STM32MP157F-DK2 web page] is again the first resource for board documentation | |||
* [https://www.st.com/resource/en/data_brief/stm32mp157f-dk2.pdf STM32MP157 discovery kits data brief] is a good quick overview | |||
* [https://www.st.com/resource/en/user_manual/um2637-discovery-kits-with-increasedfrequency-800-mhz-stm32mp157-mpus-stmicroelectronics.pdf STM32MP157 discovery kits user manual] has everything you need to know about the board | |||
* [https://wiki.st.com/stm32mpu/wiki/Category:STM32MP15_Discovery_kits stm32mpu wiki Category:STM32MP15 Discovery kits] re-iterates some of user manual in wiki format | |||
*[https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157x-DK2 stm32mpu wiki STM32MP157x-DK2 Getting started book] is a good guide for getting set up | |||
* [https://www.st.com/en/evaluation-tools/stm32mp157f-dk2.html#cad-resources STM32MP157F-DK2 CAD resources] has schematics and PCB files | |||
LCD documentation: | |||
* Screen is FRD397B2509 TFT LCD | |||
* Driver is OTM8009A | |||
* Touch controller is FT6236 | |||
Chip documentation: | |||
* [https://www.st.com/resource/en/data_brief/stpmic1.pdf STPMIC1 data brief] | |||
* [https://www.st.com/resource/en/datasheet/stpmic1.pdf STPMIC1 datasheet] | |||
* [https://www.cirrus.com/products/cs42l51/ CS42L51 web page] | |||
* [https://statics.cirrus.com/pubs/proDatasheet/CS42L51_F3.pdf CS42L51 datasheet] | |||
* [https://datasheet.lcsc.com/szlcsc/1902141615_Lattice-SiI9024ACNU_C369574.pdf Sil9022 datasheet] | |||
* [https://www.micron.com/products/dram/ddr3-sdram/part-catalog/mt41k256m16tw-107-it MT41K256M16 web page] | |||
* [https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf MT41K256M16 datasheet] | |||
* [https://www.realtek.com/en/products/communications-network-ics/item/rtl8211f-i-cg RTL8211F web page] | |||
* [https://datasheet.lcsc.com/lcsc/1912111437_Realtek-Semicon-RTL8211F-CG_C187932.pdf RTL8211F datasheet] ("confidential") | |||
* [https://www.murata.com/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type1dx LBEE5KL1DX web page] | |||
* [https://www.murata.com/products/productdata/8813651165214/type1dx.pdf LBEE5KL1DX data sheet] | |||
* [https://www.st.com/en/development-tools/st-link-v2.html ST-LINK/V2 web page] | |||
* [https://www.st.com/resource/en/data_brief/st-link-slsh-v2.pdf ST-LINK/V2 data brief] | |||
*[https://www.orientdisplay.com/pdf/OTM8009A.pdf OTM8009A datasheet] ("confidential") | |||
*[https://focuslcds.com/content/FT6236.pdf FT6236 datasheet] ("confidential") | |||
* | |||
== Software == | |||
ST's provides [https://www.st.com/content/st_com/en/products/embedded-software/mcu-mpu-embedded-software/stm32-embedded-software/stm32cube-mcu-mpu-packages/stm32cubemp1.html STM32CubeMP1] as this board's support package. It contains: | |||
* [https://github.com/STMicroelectronics/linux ST's Linux fork] | |||
* [https://github.com/STMicroelectronics/u-boot ST's u-boot fork] | |||
* [https://github.com/STMicroelectronics/arm-trusted-firmware ST's ARM Trusted Firmware fork] | |||
* [https://github.com/STMicroelectronics/optee_os ST's OP-TEE fork] | |||
* [https://github.com/STMicroelectronics/STM32CubeMP1 STM32CubeMP1] | |||
Most of this is open source and the forks are being mainlined to the parent projects. | |||
ST-Link can be used by the following software: | |||
* GNU Screen or any terminal emulator for serial connections | |||
* [https://openocd.org/ OpenOCD] for JTAG | |||
* | |||
== Bugs == | == Bugs == | ||
Bugs we've found when porting the board to Buildroot: | |||
* You need to probe the snd_soc_cs42l51_i2c module manually to get audio running | |||
*The Wi-Fi uses a Broadcom chipset which can be a little buggy sometimes | |||
== Pinouts == | |||
See the [[STM32MP157F-DK2/40 pin pinout]] page for a textual description of the Pi header. |
Latest revision as of 13:16, 31 January 2022
The STM32MP157F-DK2 is a development board starring the STM32MP157F system on a chip and a ton of peripherals.
This board is a newer revision of the STM32MP157C-DK2 and as far as I can tell all STM32MP157C-DK2 hardware documentation applies to the STM32MP157F-DK2.
Almost all you need to know about this board and its chips is available without signing any kind of NDA or jumping through hoops. Very very convenient.
Specifications[edit | edit source]
Core details:
- 32-bit Dual Core Cortex-A7 800MHz main processor
- 32-bit Cortex-M4 coprocessor
- 512MiB DDR3 RAM
- 5V 3A power supplied over Type-C
- ST-LINK/V2-1 debugging
- $109 USD from Mouser (as of 2022-01-29)
Storage:
- microSD card slot
Networking:
- Wi-Fi 802.11b/g/n
- Bluetooth Low Energy
- 10/100/1000 Gigabit Ethernet
USB:
- 4 USB 2.0 host type-A ports
- Dual-role USB 2.0 host or device type-C port
Video:
- 4 inch 480x800 LCD touch screen
- HDMI
Audio:
- Stereo headset jack with microphone input
Other IO:
- Raspberry Pi 40-pin compatible header
- Arduino Uno V3 compatible headers (3.3v only)
- 4 user LEDs
- 2 user buttons
Documentation[edit | edit source]
System on chip documentation:
- STM32MP157F web page is the first resource for documentation on the chip
- STM32MP157F datasheet gives an exhaustive overview on the chip
- STM32MP157 reference manual provides information for driver writing
- stm32mpu wiki has a large amount of documentation for all levels of development
Board documentation:
- STM32MP157F-DK2 web page is again the first resource for board documentation
- STM32MP157 discovery kits data brief is a good quick overview
- STM32MP157 discovery kits user manual has everything you need to know about the board
- stm32mpu wiki Category:STM32MP15 Discovery kits re-iterates some of user manual in wiki format
- stm32mpu wiki STM32MP157x-DK2 Getting started book is a good guide for getting set up
- STM32MP157F-DK2 CAD resources has schematics and PCB files
LCD documentation:
- Screen is FRD397B2509 TFT LCD
- Driver is OTM8009A
- Touch controller is FT6236
Chip documentation:
- STPMIC1 data brief
- STPMIC1 datasheet
- CS42L51 web page
- CS42L51 datasheet
- Sil9022 datasheet
- MT41K256M16 web page
- MT41K256M16 datasheet
- RTL8211F web page
- RTL8211F datasheet ("confidential")
- LBEE5KL1DX web page
- LBEE5KL1DX data sheet
- ST-LINK/V2 web page
- ST-LINK/V2 data brief
- OTM8009A datasheet ("confidential")
- FT6236 datasheet ("confidential")
Software[edit | edit source]
ST's provides STM32CubeMP1 as this board's support package. It contains:
Most of this is open source and the forks are being mainlined to the parent projects.
ST-Link can be used by the following software:
- GNU Screen or any terminal emulator for serial connections
- OpenOCD for JTAG
Bugs[edit | edit source]
Bugs we've found when porting the board to Buildroot:
- You need to probe the snd_soc_cs42l51_i2c module manually to get audio running
- The Wi-Fi uses a Broadcom chipset which can be a little buggy sometimes
Pinouts[edit | edit source]
See the STM32MP157F-DK2/40 pin pinout page for a textual description of the Pi header.